ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Questions on new install of SBS 2011 on ML350 G6

Bruce P A Dienes
Occasional Contributor

Questions on new install of SBS 2011 on ML350 G6

Apologies in advance for newbie questions....

After doing a manual install of SBS Standard 2011 there are three items in the Device Driver area that are flagged, and I cannot find drivers on the HP site for them:
Base System Device
IPMI Interface
USB Serial Controller
When I plug in a USB device I am informed that it "could work faster in a 2.0 port..."

I have not installed the HP management software, as I was waiting for the 2011-compatible version coming out in a few days. Was that a mistake? Can I install and use software from the new SmartStart when it comes out even if the server is already up and running?

Any suggestions appreciated...

Cheers,

Bruce
4 REPLIES

Re: Questions on new install of SBS 2011 on ML350 G6

Hi,

SBS Standard 2011 on HP proliant server does not support.
You will not find a compatible driver. :(

Regards.

Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
Tobias Pettersson
Occasional Visitor

Re: Questions on new install of SBS 2011 on ML350 G6

Use drivers for 2008 R2.
Terry Hutchings
Honored Contributor

Re: Questions on new install of SBS 2011 on ML350 G6

You may not be able to install the PSP for 2008 R2, but the individual driver packages may work.

I believe two of those items will be fixed by installing the iLO2 driver.
The truth is out there, but I forgot the URL..
AainR
Occasional Contributor

Re: Questions on new install of SBS 2011 on ML350 G6

"SBS Standard 2011 on HP proliant server does not support"

 

I"m hoping this really isn't true.  I'm planning to upgrade our Proliant ML350 G5 from SBS 2003 to SBS 2011.