ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

R3000XR UPS and Windows2000

R3000XR UPS and Windows2000

Hello,

I have a question about the UPS X3000XR.
installed the UPS and LANSAFE but when I start the servers I got an message in the
device manager of Windows dat the UPS is not installed (yellow question mark)

Can anybody help with this?

Thnaks in advance
NFS/CIFS error
1 REPLY
Doug Brown_3
Occasional Visitor

Re: R3000XR UPS and Windows2000

You simply need to install the LANSafe driver for the UPS in Device Manager. Go through the typical way of installing device drivers i.e. go into properties of the UPS and choose Update Driver. Then point it to the ENG_LS3.inf file which should be located under the LANSAFE\NTAND95\ subdirectory where the setup.exe file is.

Then reboot and Windows 2000 will pick up the UPS and place it under Batteries in Device Manager.

Doug