RAID 1 and RAID 5 configuration on Proliant ML350 G4P

[kenzau93]

Hi,

I would know who to do for creating and RAID 1 and RAID 5 on my proliant ml350 g4p. I've 5 internel scsi disks.

Thank you for your response.

Kenny.

[Steven Clementi]

Kenny:

If the system as a Smart Array Controller, you can use the ACU to configure RAID arrays. You can also use the ORCA utility built into the bios/firmware of the Smart Array. (Press F8 just after the adaptor initializes upon the bootup sequence).

If you do NOT have a Smart Array Controller, or some other Array Controller, then you can not do hardware RAID and would be stuck with Software RAID or having to get an array controller.

If you want to do software RAID, let us know which OS you will be installing.


Steven

[kenzau93]

All is ok now, i've used the f8 touch. Thank you very much Steven.

Kenny.

[Steven Clementi]

Anytime.

Please remember to close out the thread if you are fully satisified and have a solution. This will help out others as they search for solutions to their similar problems.

Although not mandatory, remember to assign points, 0 through 10 per reply... depending on how well a post has helped you progress through your situation.

This gives the other readers insight as to how well a suggestion may have helped you and a good indication that it may work for them.

Enjoy the forum and ask for help when needed. Or reply to others to help their situation.


Steven