ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

RAID 10 Configuration on MSA 2000 G3

 
Thaufik
Occasional Advisor

RAID 10 Configuration on MSA 2000 G3

I have 8 disks installed in MSA2312fc, which each have a capacity of 600GB and configured RAID 10. when I choose the 8 disks for RAID 10 result showed 1,2TB.Supposed to be 2.4 TB

MSA show the configuration RAID 10
RAID1-1 : 2 Disk
RAID1-2 : 2 Disk
Spare : 4 Disk

There is a solution to this case?



Thank's & Peace

Thaufik Jonhar
Thanks & Peace

Thaufik Jonhar
4 REPLIES
Torsten.
Acclaimed Contributor

Re: RAID 10 Configuration on MSA 2000 G3

This looks like you have 4 disks configured, this means the capacity of 2 disk drives = 1.2TB.

But why 4 spare disks?

The array did what you have configured.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Thaufik
Occasional Advisor

Re: RAID 10 Configuration on MSA 2000 G3

I dont know why the option spare is show, i'm just choose 8 disk for raid 10 configuration.
and the result is :
RAID1-1 : 2 Disk
RAID1-2 : 2 Disk
Spare : 4 Disk

any solution for disable the option spare?

Thank's
Thanks & Peace

Thaufik Jonhar
Torsten.
Acclaimed Contributor

Re: RAID 10 Configuration on MSA 2000 G3

Delete the spares and add them to the vdisk.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Johan Guldmyr
Honored Contributor

Re: RAID 10 Configuration on MSA 2000 G3

When you create them I believe there is this option about sub-disk or sub-spare (or something like that) - this can influence how many spares are assigned.