cancel
Showing results for 
Search instead for 
Did you mean: 

RAID 5

Ayman Altounji
Valued Contributor

RAID 5

When trying to configure raid 5 on an ML370 I am geting messages about the performance of auto reliability monitoring. Is this a hardware error or a problem with raid 5.

Thanks

Richard, U.K.
2 REPLIES
Ayman Altounji
Valued Contributor

Re: RAID 5

Actually, neither. When the system is initially configured, the system does a background parity and reliability check (Dynamic Sector Repairing)--depending on the configuration it could take several hours. Until then, the performace accelerator will be disabled, but after that the system will be at fully capability.
Ayman Altounji
Valued Contributor

Re: RAID 5

Background parity monitoring can take up to 24 hours after installation (depending on network load, etc).