ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

RAID SATA CTRL 82891GR over ML310 works bad

SOLVED
Go to solution
superataru
Occasional Visitor

RAID SATA CTRL 82891GR over ML310 works bad

Hi all.
Today HP assistance changed my MB in my Proliant ML310 G3. They changed it because the older one reported that RAID 1 was degraded but Disks were ok and also Bios refused to accept the usual password we set!!!
Anyway . . . server was working fine with channel 0 sata disk, while the second was out (channel2).
Once the new motherboard was up, i went to enable embedded sata the to manage array.
With a big suprise CTRL SATA found raid informations over channel 2 disk and channel 0 was reported as "missing one".
Which is the problem? How car rebuild my array?
Tnx in advance.
2 REPLIES
KarloChacon
Honored Contributor
Solution

Re: RAID SATA CTRL 82891GR over ML310 works bad

superataru
Occasional Visitor

Re: RAID SATA CTRL 82891GR over ML310 works bad

Hi. Tnx for the answer.
I red the manuals and installed hp software.
Well i've understood that my situations is not so simple, if it as a solution but . . . to reinstall Win203 Srv.
I got only one good disk (dynamic with 2003 srv), lost all RAID1 informations and, if i'm right, i cant do a build RAID1 on a new array because my onlu one disk in dynamic.
Isn'it? Tnx in advance.