HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Showing results for 
Search instead for 
Did you mean: 

RAID Status

Occasional Contributor

RAID Status

Hi all,
I am using HP ProLiant ML350 G6 Server. Just a quick question, how to check the RAID used for this server? Can we check in the BIOS setting?
Honored Contributor

Re: RAID Status

If you have installed the server using the Smart Start, then the Insight Agents has been installed, and you can use the System Managemnet Homepage (SMH)
Or for the Array Configuration Utility (ACU).
Or open the Option ROM Configureble Adataper (ORCA). Wich is the offline/Bare metal setup progarm for the RAID controller.

If you have not smart startet the server, you can install the Product support pack (PSP). This will install all drivers needed and all the nice tools.

To see the BIOS setting. You will have to open the BIOS setup program (RBSU), wich you will have to do offline.
And you will need to look at all setup possibilities.
You could try to open the Insight Diagnostics program.

Beware you can not check the RAID setup in the BIOS.