ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

RAID configuration and system board replace

Mahbubul Hasan
Occasional Contributor

RAID configuration and system board replace

One of our Server which built-in RAID controller and RAID configuration is
RAID 1 for OS and RAID 5 for Data.
Unfortunately system board become faulty, that’s why we need to replace
the system board.
I need to know after replacing the system board, RAID configuration is working as before?

--
Md.Mahbubur Rahman


2 REPLIES
JKytsi
Honored Contributor

Re: RAID configuration and system board replace

raid config is in the disks, so just put them back as they were with original.
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
WFHC-WI
Honored Contributor

Re: RAID configuration and system board replace

Pay special attention to any message you get on the initial scan for disks at startup. You may see something to the effect of "Drive positions changed" or another message requiring you to choose F1 or F2. From what I can remember there is a fairly short timeout on this message so it may be best to press any key and carefully read the prompt.

Good luck!