HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

RAID configuration for ProLiant DL380p Gen8

 
Softway
Occasional Visitor

RAID configuration for ProLiant DL380p Gen8

Hi,

      I configured 8 disks as two raid.

     raid 1: disk 1 + disk2 + disk3(spare)

     raid 5: disk 4~ 8

Why I see three disks when I booted to linux livecd.

lsblk:

sda 8:0 0 256M 1 disk
`-sda1 8:1 0 251M 1 part /media/VID
sdb 8:16 0 279.4G 0 disk
sdc 8:32 0 1.1T 0 disk

 

1 REPLY
Jimmy Vance
HPE Pro

Re: RAID configuration for ProLiant DL380p Gen8


Softway wrote:

Hi,

      I configured 8 disks as two raid.

     raid 1: disk 1 + disk2 + disk3(spare)

     raid 5: disk 4~ 8

Why I see three disks when I booted to linux livecd.

lsblk:

sda 8:0 0 256M 1 disk
`-sda1 8:1 0 251M 1 part /media/VID
sdb 8:16 0 279.4G 0 disk
sdc 8:32 0 1.1T 0 disk

 


`-sda1 8:1 0 251M 1 part /media/VID The Virtual Install Disk is enabled in the BIOS, go into RBSU an disable the VID




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!