HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

RAID5 on ML370 G4

 
Chevallier Seb
Occasional Visitor

RAID5 on ML370 G4

Hello,

I just ask, because i didnt manage to start an RAID5 Array on a ML370 G4.

I just put 3 new disk 70 Go SAS on my server, i boot on the Smart HP CD and when i begin the installation, the procedure tells me that no array was found.

Everything seems ok in the bios where i can see nowhere something about the RAID ?

Tells me to use ORCA but cant find it ?

Can someone help me...



2 REPLIES
Andrew Young_2
Honored Contributor

Re: RAID5 on ML370 G4

Hi.

I am assuming that you are using the ML370 G4 with the P600 RAID controller.

When you boot the server you should get an option to press F8 to set up your RAID controller.

If you are not getting this message the the server is not recognising the RAID card for some reason. I would suggest openning the server and reseating the controller in its slot as the first step.

When you power on the server do the HDD LED's flash?

HTH

Andrew Y
Si hoc legere scis, nimis eruditionis habes
Chevallier Seb
Occasional Visitor

Re: RAID5 on ML370 G4

Thanks for your help,

The server is not at my office but i go there this afternoon and i will put you the option on the server boot

Maybe it will be more clear

Thanks

Sebastien