HPE Community
ProLiant Servers (ML,DL,SL)
1752671 Members
5556 Online
108789 Solutions
New Discussion

RIB and Mouse Doesn't Work

 
Ayman Altounji
Valued Contributor

‎06-17-2001 04:00 PM

‎06-17-2001 04:00 PM

RIB and Mouse Doesn't Work

I have installed a RIB board and when I use the cable supplied to connect the mouse and keyboard the mouse driver fails within NT. Switch the mouse back to the ports on the motherboard unplugging the splitter cable and all is well. Tried another RIB board and another splitting cable with same problem. Remote access is possible but is jerky and needs syncing every time you connect. This can't be right. Any ideas anyone?
Thanks
Dave
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎06-25-2001 04:00 PM

‎06-25-2001 04:00 PM

Re: RIB and Mouse Doesn't Work

Dave,

For the DL360, you don't use the splitter cable on the RIB. You are correct in using the keyboard and mouse ports on the motherboard.

Have a nice day,

Mike
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.