ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

RILO II in ML350G3

Colin_29
Trusted Contributor

RILO II in ML350G3

One of our clients has a Remote Insight Lights-Out Edition II board that they have fitted into slot 5 of a ProLiant ML350 G3. Initially the system appeared to work ok but after a few hours has started rebooting with the following errors logged by the system management logs.

POST Error: A Critical Error occurred prior to this power-up
ASR Detected by System ROM
ASR Reset Limit Detected by System ROM
PCI Bus Error (Slot 0, Bus 0, Device 5, Function 0)

We are wondering if the board is in fact compatible with the server or whether it should be in a specific slot other than 5?
1 REPLY
Oleg Koroz
Honored Contributor

Re: RILO II in ML350G3

- slot 5 perfectly good
- try to reseat card
- from F8 reset defaults and reconfigure
- make sure use latest firmware for card and system ROM for Server
- from diagnostic try to find what you have under device 5 and see if some resources allocation conflict