HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

RIS Server Boot

 
Ernest Correale
Occasional Visitor

RIS Server Boot

I am trying to configure a DL145 G2 for network boot using a MS RIS Server. I am using the Broadcom drivers which should be the correct NIC drivers for the server but the system fails to load the drivers after jumping from PXE to the MS environment. I have the same server already installed through the CDROM and I verified that I am using the correct drivers.I am trying to configure a DL145 G2 for network boot using a Microsoft RIS Server. I am using the Broadcom drivers which should be the correct NIC drivers for the server but the system fails to load the drivers after jumping from PXE to the MS environment. I have the same server already installed through the CDROM and I verified that I am using the correct drivers. Has anyone had success loading an OS using RIS on a DL145 G2?