RIS/WinPE NC375i Drivers on ML370 G6

[Keith Nance]

Has anyone been successful getting WinPE 2.0 to work with Network Support with this configuration. I have updated to the latest Firmware and Driver. I have tried the Qlogic 3044 driver. This issue is due to the VBD driver that HP uses, but I have not been able to find a RIS/WinPE Driver for this particular card.

[Philip Whitener]

I am tring with WinPE 1.0 (2003) with no luck; for PE 2.0, you may be able to use the hp3n driver from the SmartStart Scripting Toolkit 2.2c.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3884319&prodNameId=3884320&swEnvOID=4024&swLang=13&mode=2&taskId=135&swItem=MTX-e862540ea81c4df9b63963a978

[Keith Nance]

Thanks you for the response. I finally found the Driver in the Scripting Tools and it did work with WinPE 2.0. The only issue I have with this, is that I hunted for months trying to find it. Most of the other WinPE Drivers are posted on the Drivers site

Thanks again

Keith