cancel
Showing results for 
Search instead for 
Did you mean: 

ROM I/O Error

C F Runciman
Occasional Contributor

ROM I/O Error

Sometimes when DL360 G2 reboots it generates this error. Is there a fix?
7 REPLIES
Oleg Koroz
Honored Contributor

Re: ROM I/O Error


Where exactly from POST or in System Log?
Do we missing any Updates? System ROM; firmware?
Any additional card installed to riser?
O/S ?
C F Runciman
Occasional Contributor

Re: ROM I/O Error

Appears on screen immediately after boot.
Server has latest 7.1 firmware updates.
OS 2000 but irrelevant.
Oleg Koroz
Honored Contributor

Re: ROM I/O Error

7.10 is only Drivers
System ROM 2004.05.01 ?
SA 5i Controller version 2.58 A ?

http://h18023.www1.hp.com/support/files/server/us/locate/20_2543.html
C F Runciman
Occasional Contributor

Re: ROM I/O Error

5si Controller and machine bios are at the versions specified.
Oleg Koroz
Honored Contributor

Re: ROM I/O Error

You can verify and reset riser slot at the back, I assume you don't have any PCI cards in the riser?
A Presence of some Corruption exist, so you might be able to run diagnostic from SS CD 7.2 or FDD
http://h18004.www1.hp.com/support/files/server/us/subscription/PSM_subscription.html
http://h18023.www1.hp.com/support/files/server/us/download/18396.html
If diagnostic can see any problem replace affected HW
Akos Hegedus
Valued Contributor

Re: ROM I/O Error

1. Try to reapply System BIOS!
2. you didn't installed a second video adapter?
C F Runciman
Occasional Contributor

Re: ROM I/O Error

Will try. No do not have a second one. Thanks for all your help.