ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Rack for DL320 G2

Christian Fuentes
Occasional Contributor

Rack for DL320 G2

We recently adquired a HP ProLiant DL320 G2 server and today I've received a 19" server rack mural that has 600mm depth.

Is there any option to fit the DL320 in that kind of rack?

Thanks in advance,
Christian
5 REPLIES
Andrzej Kowalik
Honored Contributor

Re: Rack for DL320 G2

Try to find solution here:
http://www.racksolutions.com/hp/index.html
regards,
Andrzej
Christian Fuentes
Occasional Contributor

Re: Rack for DL320 G2

Sorry for my english.

The problem is about the metal pieces that support the server inside the rack. The piece does 750mm long and it doesn't fit in the rack that I have (it does 600mm).

Is there any piece to support the server of 600mm long?

Thanks
Andrzej Kowalik
Honored Contributor

Re: Rack for DL320 G2

To dl320g2 you could order "Third Party Cabinet Rack Option - 174574-B21". These rails provide support for 21-29 inches racks.
regards,
Andrzej
Colin_29
Trusted Contributor

Re: Rack for DL320 G2

If you do this you should not fit a back door onto the rack. HP servers circulate air from front to rear and there will probably not be enough space at the rear to allow a free flow of air if you shut the door.
Christian Fuentes
Occasional Contributor

Re: Rack for DL320 G2

Thanks a lot for your recommendation. I'll buy a Third Party Cabinet Rack so I can fit the server in the rack. The back door thing is no problem, so my rack hasn't back door.

Thanks,
Christian Fuentes