ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Rack mount kit on a Proliant DL360

jcorcoran22
Occasional Visitor

Rack mount kit on a Proliant DL360


The server is stopping on left side when removing it - is there some lock/feature I am not using??? Ttying to get it out of the rack to fix it

:)
2 REPLIES
chongkan
Trusted Contributor

Re: Rack mount kit on a Proliant DL360

Hi,

There is no locking mechanism, the server must be getting stucked with something. Does this server has a cabla management arm? If so, try to take a look to it, look for any cable getting stucked in the management arm, maybe you can pull out the top server (if any) and then take a look to the back of the 360 to see what is happening..

Regards
Pradip Chakrabarti
Frequent Advisor

Re: Rack mount kit on a Proliant DL360

Hi,

You may check the rack deployment guide ( COMPAQ Rack / TELCO Rack / Third Party Rack)

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&taskId=&contentType=SupportManual&prodSeriesId=254886&prodTypeId=15351

Hope this is going to help you

Pradip