HPE Community
ProLiant Servers (ML,DL,SL)
1753868 Members
7620 Online
108809 Solutions
New Discussion

Raid 1 configuration with E200i array controller in hp ml350 g5

 
tmsabu
Occasional Contributor

‎03-16-2013 09:54 PM

‎03-16-2013 09:54 PM

Raid 1 configuration with E200i array controller in hp ml350 g5

How to configure raid 1 in hp ml350 g5

 

and also i want to know raid 1 requirements

 

i have only below requirements

 

E200i 128 mb bbwc array controller

 

2 * 146 gb

 

i am struggling with configure raid 1

 

pls anyone help

0 Kudos
Reply
2 REPLIES 2
active-Pro
HPE Pro

‎03-17-2013 06:28 PM

‎03-17-2013 06:28 PM

Re: Raid 1 configuration with E200i array controller in hp ml350 g5

Hi ,

You can use the ORCA (depending on the number of drives it will try and configure it for you, but if you need to change it you can do it by pressing the F8 Key to configure)

Please download this HP ProLiant ML350 Generation 5 Server User Guide and on Page 68/69 there is more info.

 



I am an HPE Employee.
Regards.

I work for HPE. The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.

Accept or Kudo

0 Kudos
Reply
Med-H
Frequent Advisor

‎03-18-2013 02:11 AM

‎03-18-2013 02:11 AM

Re: Raid 1 configuration with E200i array controller in hp ml350 g5

Hi,

 

You can use the ORCA Or the ACU to create Raid1  :

 

create a logical drive using ORCA :

 

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c00688683/c00688683.pdf

 

create a logical drive using ACU :

 

http://h10032.www1.hp.com/ctg/Manual/c00709035.pdf

 

Please let me know if you need further information

I am an HP employee
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.