Raid 1 mirror not showing unallocated

[willsell]

I just rebuilt an ML150 G5 via Acronis Server Recovery. Prior to doing the rebuild I had setup a raid 1 mirror of two hard drives.
When I boot up the adptec shows two sata drives which is correct and 1 mirrored drive (optimal).
Next I initiated the recovery process which also asks for the SCSI raid drivers.
I specify the location of the drivers and all goes well.
When windows starts up I open disk manager.
It shows the two Sata drive partitions (great!)
But the mirrored drive shows 0 size and no drive letter.
Do I need to recreate the array again?
Any suggestions on what I am missing would be appreciated.

[TarunJain]

Hi,
What is the size of the mirrored drive in disk manager? What is the status of the space, is it shown as unallocated?

Please share the snapshots of the disk manager if possible.

[willsell]

mirrored drive is 500gig In disk manager it shows 0