ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Raid 5 recovery process on HP ML150 proliant

 
Danieltbt05
Occasional Contributor

Raid 5 recovery process on HP ML150 proliant

Currently i have Hp Proliant ML150 with raid 5 , 4 harddisks. In case a harddisk fails, how to take it out and what do i need to do for it to keep the system keep on running ? Thanks

1 REPLY
Caster Troy
Regular Advisor

Re: Raid 5 recovery process on HP ML150 proliant

Hi Daniel,
In case of Hot Plug SCSI disks there is not much to do if you ever face a single hard disk failure. You just have to pull it out and put the new disk in, the controller will automatically start rebuild and you can view its status with the help of Array Configuration Utility. However no configuration changes to be done while array is in still in rebuild state. Good Luck!!
Evil Has Its Winning Ways