Raid Configuration problem

[dhananjay_1]

Hello !

We have a compaq ML370 server at one of our customer with 3 Disk (9.1gb) in Raid 5 configuration. OS is windows NT4.0
The problem is ,yesterday there was a power fluctuation and after that server does not boot
and gives missing operating system error.
Now When we checked the raid configuration we found that controller is showing Raid 0 configuration.
i wanted to know that wheather this could be bcoz of power problem and can we revert back to raid 5 without lossing the data.

pls help bcoz the customer has not taken the backup.

Regds
Dhananjay

[e4services]

You may try to reconfigure the RAID, selecting the drives in order, just do not "initialize" it. Select the drive, save the config and reboot. You may get lucky. Either way it is lost.

[dhananjay_1]

Not get a proper Answer ...