Raid problem

[KarloChacon]

yes your Data is going to be OK.

But in order to get everything fine:

- Backup. it's not me. it is HP that recommend to this when any activity related with HDDs is taking place.

see HP Recommendation

"Back up all data on the array. Although array expansion is unlikely to cause data loss, observing
this precaution provides additional data protection."


but if you want a testimony I've done it several times. NO PROBLEMS AT ALL.
the more recent on a Exchange Server.


- Have the latest firmware for your controller E200.
http://urlao.com/e200firmware

- Have the latest Array Configuration Utility also. 7.85
http://urlao.com/acu785


and follow the PDF now I added with new updates.


anything else just let us know

Regards

[luongson]

Hi all.
I have the seem case,(Server DL 360 G5, Smartarray E200i, BBWc 128 ) but not see MigrateRAID/StripSize in hp smart start 7.90 to add a SAS HDD. Help me.

[Believe_2]

Thank you all
I've done
My data is ok when i migrate from Raid0 to Raid 1.
Thank again

[KarloChacon]

that sound fine really good

don't forget assign points that is the way you appreciate our help

http://forums1.itrc.hp.com/service/forums/helptips.do?#33

regards