ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Raid1 degraded and Raid5 not seen on STA raid Adapter

Dominique_11
Frequent Advisor

Raid1 degraded and Raid5 not seen on STA raid Adapter

Hi,

My configuration:

1 ML150 With an 6-port SATA adapter (Adaptec)

Raid configuration: 1 Raid1 + 1 Raid5 (3disk)

Disks size = 80 Gb

My problem:

Following a problem disc on the Raid1, my raid5 is not seen any more, and the raid1 is in a "degraded" state. After swap defective disc, my raid-1 is always degraded and my raid5 is still not seen. I have to reverify the state of my discs (this morning) with the ARC utility ==> my new disc is grayed. After exit of the utility, I do not see any more any disc!!

Could you help me ?

Where can y found a full documentation of the ARC Adaptec utility ?

Regards,
Dominique
2 REPLIES
Oleg Mochkin
Trusted Contributor

Re: Raid1 degraded and Raid5 not seen on STA raid Adapter

Hi,
this is 6 port SATA controller guides:
6-Port SATA RAID Controller User Guide
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00285315/c00285315.pdf

HP Storage Manager User Guide
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00405440/c00405440.pdf
Hope this help.
BR, Oleg.
Dominique_11
Frequent Advisor

Re: Raid1 degraded and Raid5 not seen on STA raid Adapter

Thank you Oleg.

Now, I have a full documentation.

Cordialy,
dominique