Rails for ML350

[Alexleont]

We need to install ML350 (rackmount, first model) in cabinet.

Which rails (part number) are compatible with this server?

Best regards,
Alexander

[Oleg Koroz]

As all G1 ML350 intended to be towers, for use in the rack, customer need to purchase tower to Rack kit where rails is a Part of Kit
http://h20000.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_201346-001/TPM_201346-001.pdf
SPN 164277-001 OPN 158438-B21

[Alexleont]

We have ML350 reconstructed from tower to rack, but we have lost rails ...

Is it possible to use any compatible rails with this server?

Best regard,
Alexdander

[Oleg Koroz]

PIII PL800 might use same rails, can't guarantee, also if you have 1600 or 1850 in the RACK slide out Remove one Rail and try if Screws holes match with chassie as usually there few more holes in the rails that you can use.

Possibly solution can't confirm
http://partsurfer.hp.com/cgi-bin/spi/showphoto?partnumber=165689-002
http://partsurfer.hp.com/cgi-bin/spi/showphoto?partnumber=165689-003