ProLiant Servers (ML,DL,SL)

Read Errors Hard 0x000002f6

 
HP-KID
Occasional Visitor

Read Errors Hard 0x000002f6

I have this, do i have to replace this disk ?

Read Errors Hard 0x000002f6

Read Errors Retry Recovered 0x0000099f

 

P.S : ADMIN: Post was moved as a new topic from Read Errors Hard 0x00000006 (Since Factory) and (Since Reset) 0 Errors 

3 REPLIES 3
sudhirsingh
HPE Pro

Re: Read Errors Hard 0x000002f6

Hi @HP-KID 

Error count: 758, (In decimal)

This could be potential hardware or firmware issue.

Look for latest drive firmware and update it.

Check again later/after couple of days post firmware update,

whether the error count is increasing ? also  if you are facing any issues in the OS/application level (read/write error or IO/Bad block) if yes, you should replace the drive. 

however,

If there is no problem and errors are also not incrementing you can continue to use this drive until there is any failure/Predictive failure/Bad block observed.

Regards,

Sudhir

While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

>Accept or Kudo

HP-KID
Occasional Visitor

Re: Read Errors Hard 0x000002f6

Hi! @sudhirsingh Thank you so much.i'll do what you said and check.

sudhirsingh
HPE Pro

Re: Read Errors Hard 0x000002f6

Hi @HP-KID 

Did that worked?

If you feel given solution/workaround is useful then please accept the solution to close this thread.

 

If you feel this was helpful please click the KUDOS! thumb below!

Regards,

Sudhir

While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

>Accept or Kudo