ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Ready for recovery

Arto Saraniva
Occasional Visitor

Ready for recovery

We had temp problems with one of the DL380 G3 scsi disk. Now all disks seems ok, but still the recovery will not start. Have we missed something?

=>
Smart Array 5i in Slot 0
array A
physicaldrive 2:0 (port 2:id 0 , Parallel SCSI, 36.4 GB, OK)
physicaldrive 2:1 (port 2:id 1 , Parallel SCSI, 36.4 GB, OK)
physicaldrive 2:2 (port 2:id 2 , Parallel SCSI, 36.4 GB, OK)
physicaldrive 2:3 (port 2:id 3 , Parallel SCSI, 36.4 GB, OK)
physicaldrive 2:4 (port 2:id 4 , Parallel SCSI, 36.4 GB, OK)
physicaldrive 2:5 (port 2:id 5 , Parallel SCSI, 36.4 GB, OK)

=>
Smart Array 5i in Slot 0
array A
logicaldrive 1 (169.6 GB, RAID 5, Ready for recovery)
5 REPLIES
SPa
Trusted Contributor

Re: Ready for recovery

Post the ADU report.That should give some clue.
Arto Saraniva
Occasional Visitor

Re: Ready for recovery

Please find it attached.
SPa
Trusted Contributor

Re: Ready for recovery

The ADU report shows the Drive at Port 2 SCSI ID 5 has lot many errors and this looks to be the fault of the logical drive not rebuilding.

I would prefer taking a complete backup,replace drive and recreate.

Also the firmware for the drive needs an update.
Marek Nelec
Honored Contributor

Re: Ready for recovery

Actually the errors might logged by the drive with SCSI ID 5 _because_ of outdated firmware (which may be bugged). Also the controller firmware itself needs an upgrade to, he current version is 2.62.
SPa
Trusted Contributor

Re: Ready for recovery

Yes,Should try update the firmware for the drive and controller first and then check