ProLiant Servers (ML,DL,SL)
1748266 Members
3350 Online
108760 Solutions
New Discussion

Re: Rebooting on Hardware Configuration

 
Ayman Altounji
Valued Contributor

Rebooting on Hardware Configuration

I went to add an HBA card to one of our servers today and when I went into the system configuration to update the hardware configuration it only reboots. I removed the new card and tried again and once again it rebooted. I used SmartStart 5.3 to update the system configuration files. I confirmed that the ROMPAQ is the latest version. Still the server reboots when I attempt to update the hardware configuration.

Any ideas?
1 REPLY 1
Ayman Altounji
Valued Contributor

Re: Rebooting on Hardware Configuration

I found an article that explained this in the knowledgebase. Apparently the SCU on the ML370G2 doesn't control the hardware configuration and this is done from the Rom Based Setup Utility.

http://www.compaq.com/support/techpubs/customer_advisories/EL010402_CW21_0.html