ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Recover a BIOS Mode backup on a ML30 with UEFI Boot

PiBaer
Occasional Contributor

Recover a BIOS Mode backup on a ML30 with UEFI Boot

I have to Recover a Bios Backup (ML310) to a ML30

Setting ML30 to Legacy BIOS Mode -> the  Smart Array isnt reconized
Setting ML30 to UEFI Boot Mode-> the Recover stops with a Error (BIOS on UEFI not possibile...)

Some One with the BIG Idea??

Thx Benedikt 

2 REPLIES
Torsten.
Acclaimed Contributor

Re: Recover a BIOS Mode backup on a ML30 with UEFI Boot

The dynamic smart array works on UEFI mode only.

 

>> the Recover stops with a Error 

Details, please!


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
PiBaer
Occasional Contributor

Re: Recover a BIOS Mode backup on a ML30 with UEFI Boot

Hi Torsten,

ML30 in UEFI Mode:

Restoring the Server (boot from CD-> repair-> advanced... ) 

Error Message: "Cannot restore BIOS  based recovery points on UEFI based computers. Please select a UEFI  based recovery point."

My Backup was made in a Server in BIOS Mode  - i need to restore it - and i have to use a RAID 5 configuration

Thx

Benedikt