HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

RedHat installation on Dl160 G6 server

 
SOLVED
Go to solution
wali chabi
Frequent Advisor

RedHat installation on Dl160 G6 server

Hi all!
I'm installing Redhat Enterprise version a proliant dl160 g6 server with the smartarray P410 controler. During the installation the message " unable to find any device of the type needed for this installation type..." display. The Easy-Setup cd i have is for Microsoft Windows only. I the one I also download is the same. Please help me to solve the problem
8 REPLIES
Michal Kapalka (mikap)
Honored Contributor
Solution

Re: RedHat installation on Dl160 G6 server

hi,

check this site from HP :

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3884344〈=en&cc=us&prodTypeId=15351&prodSeriesId=3884343&taskId=135

use your RHEL version you should find the drivers for your OS.

mikap
wali chabi
Frequent Advisor

Re: RedHat installation on Dl160 G6 server

Thank you for your response. My problem is that during the installation, the disks and the smartArray are not detected. Can I get the step by step way to install it?
Michal Kapalka (mikap)
Honored Contributor

Re: RedHat installation on Dl160 G6 server

hi,

you need to load a driver for your controller, because redhat don;t have it.

mikap
wali chabi
Frequent Advisor

Re: RedHat installation on Dl160 G6 server

Hi!!
Thank you for collaboration
What is the correspondind driver for Smart Array P410 and how to install it during RHEL installation?
Michal Kapalka (mikap)
Honored Contributor

Re: RedHat installation on Dl160 G6 server

hi,

on this site you will find all available drivers for your controller :

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3883931&taskId=135&prodTypeId=329290&prodSeriesId=3883890〈=en&cc=us&submit=Go%20%C2%BB

because you don't defined RHEL version you need to select, mostly the driver is loaded from FDD. HP have a USB kay that is able to simulate the usb keay as FDD medium.

mikap
Michal Kapalka (mikap)
Honored Contributor

Re: RedHat installation on Dl160 G6 server

hi,

one question, did you configured the raid ???

i mean if you ocnfigured RAOD level from your disks ???

mikap
wali chabi
Frequent Advisor

Re: RedHat installation on Dl160 G6 server

Hi,
Yes I configure the RAID5.I use the Easy-setup cd to create the raid.
Gerardo Arceri
Trusted Contributor

Re: RedHat installation on Dl160 G6 server

If your controller is a P410 it should work with the standard cciss driver included with Red Hat Enterprise.
I suggest you take a look at the following thread:
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1158742