ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

Redhat 6.1 can't find my scsi controlles

Ayman Altounji
Valued Contributor

Redhat 6.1 can't find my scsi controlles

I have an Proliant1000 server with an onboard ncr 53c710 scsi controller and a symbios/ncr 53c825 scsi controller in eisa slot 4
When i will install RedHat6.1 he ask for the cd but he can't find my scsi adapters i have try the "Compaq cpqarray Driver Update: Installation Support for RAID LC2 on Red Hat 6.1 and Red Hat 6.2 (TAR file format)" and the "Module Diskettes for Red Hat 6.1 and 6.2 for the AIC7XXX driver version 5.1.33 (TAR file format)" too
but he cant find any controller
i have use the Compaq System Configuration Utility too and i have use Firmware Upgrade Diskette for Compaq ProLiant 1000
but redhat 6.1 can't vind my scsi controller
can some one help me ?
Mark Cloutier
Respected Contributor

Re: Redhat 6.1 can't find my scsi controlles

What you require are drivers for the controllers that are installed. Unfortunately, this server has been retired by Compaq, and the operating system that you are using is not supported by Compaq. You may be able to find a driver in one of the other Linux forums.
We are here for a good time, not a long time!