ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Redhat AS 4 U4 can't startup after DL360G5 connect to MSA20

richeal75
Advisor

Redhat AS 4 U4 can't startup after DL360G5 connect to MSA20

customer installed Redhat AS 4 U4 on DL360G5 wiht E200, and then he install SA6402 in DL360G5 and connect to MSA20.

But linux can't startup after create logical drives on MSA20 . and Linux can startup again after disconnect MSA20.
Action Taken:
1. Run ADU , there no any hardware failure in this case.
2. Check boot order in RBSU, E200 is first one and SA6402 is second.
so what is the reason ?
zhangyi
1 REPLY
Andy_Stor
Valued Contributor

Re: Redhat AS 4 U4 can't startup after DL360G5 connect to MSA20

Did you create the logical drive on the MSA20 via ORCA, if yes delete the logical drive and then try booting the OS, if it boots up then create the logical drive using the ACU or ACU CLI via the linux host, also check the firmware of the E200 controller.
I hope it works.

-Andy