ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Remote Insight Display Problem

Ayman Altounji
Valued Contributor

Remote Insight Display Problem

Have a Remote Insight Lights -Out Edition installed in slot 1 on a ProLiant DL380. No other PCI video card is installed. Only the integrated one.
The display is very faint in DOS (Server Start) and is difficult to read in Windows with a res of 640 x 480. Have changed Monitors
how can I get a clear display

Please help
3 REPLIES
Ayman Altounji
Valued Contributor

Re: Remote Insight Display Problem

Hi, When using the rib board it automatically disable the video. But make sure you can disable it as well through device manager in window 2000:
1. Right-click on My Computer.
2. Choose "Manage".
3. Choose "Device Manager".
4. Expand the Display Adapters section.
5. Right-click on the onboard video controller and choose "disable".
Ayman Altounji
Valued Contributor

Re: Remote Insight Display Problem

Hi
You can also disable the embedded video controller on the system board : Move Switch #1 on SW2 block .

Vic
Ayman Altounji
Valued Contributor

Re: Remote Insight Display Problem

Putting in slot1 should cure it - on mine it then refound the RIB board.
I just have the problem that I can't get remote control screens working - I just get a blinking cursor top left. Everything else on RIB works fine.