ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

Replaced 146.8 drive on DL360

Occasional Contributor

Replaced 146.8 drive on DL360

I had a failed drive and had a new one shipped from HP. When I insert the new drive it fails when the array controller starts up the mirror before the OS loads. In Insight it is showing the new drive size as 136.74GB and the other existing drive as 136.98GB. I assume this is my problem. Is that a way to fix this?



P.S. This thread has been moved from Disk to ProLiant Servers (ML,DL,SL). -HP Forum Moderator

Esteemed Contributor

Re: Replaced 146.8 drive on DL360

its probably the newly disk contain different firmware version. Check with HP and request them to send the right disk.