ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Replacing SCSI array with SATA array on ML330 G3

Randy Worman
Occasional Visitor

Replacing SCSI array with SATA array on ML330 G3

I have an ML330 G3 server that is out of disk space. I looked at upgrading the disks to 5 300GIG SATA drives and I'm not sure if I can. What problems would I have if I install a SATA array controller and 5 SATA drives. I allready have a SATA controller installed and a 300GIG drive as the boot drive and it works OK. What performace can I expect from the SATA aray versus the SCSI array I now have.
1 REPLY
sandeep_raman
Honored Contributor

Re: Replacing SCSI array with SATA array on ML330 G3