HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Replacing a featureboard on a Proliant ML570

 
SOLVED
Go to solution
Wireless_1
Advisor

Replacing a featureboard on a Proliant ML570

I got a problem with a Proliant display not working (see my post from yesterday).

I tried everything and I am still stuck. So I thought if I replace the feature board, then the problem may go away with the absence of Video signal.

However, I will be grateful if someone can give me some advise in selecting the right board:

(1) My existing board (where the display does not work) currently in the server has the text 010459-001 A/W REV B FAB REV.

(2) But the two closest match I can source has the following board numbers:
- 010457-001
- 101951-001

Are they compatible? - What would happen if I say if I go for an older board (e.g. I replace the 010459 with 010457)?

(3) The picture of the one I am thinking of getting seems to have a mini daughter board attached to the 144pin socket on the board (see picture attached on the top left hand side of the board). What are these, and what difference do they make?

Thanks in advance

10 REPLIES
KarloChacon
Honored Contributor

Re: Replacing a featureboard on a Proliant ML570

ml570 g1? g2 g3 g4?

which one?

regards
Didn't your momma teach you to say thanks!
Wireless_1
Advisor

Re: Replacing a featureboard on a Proliant ML570

Sorry Karlo.

G1
KarloChacon
Honored Contributor

Re: Replacing a featureboard on a Proliant ML570

well if you need a spare part of course if you're in warranty you have to call hp support they will tell what of SB you need and they will give all the information about it

but if you wanna buy another one by your own you need the option part
look here
http://h18004.www1.hp.com/products/quickspecs/10633_div/10633_div.HTML#Options

you'll see that information according the SB you have

regards
Didn't your momma teach you to say thanks!
Rob Leadbeater
Honored Contributor
Solution

Re: Replacing a featureboard on a Proliant ML570

Hi,

According to the part numbers I can find, the spart part number for the peripheral board should be 101951-001. 010457-001 is the assembly number.

You should be able to get it direct from HP... http://partsurfer.hp.com

As to whether it's compatible I'm not sure.

The mini daughter card attached to the socket is a SmartArray card...

Hope this helps,

Regards,

Rob
Wireless_1
Advisor

Re: Replacing a featureboard on a Proliant ML570

Thanks Karlo and Rob for your reply. The server is not under warranty.

Thanks Rob for clarifying the assembly # vs part # and the bit about the smartarray controller.

I do in fact need the 101951-001 according to the Maintenance and Service manual (I never found the relevant section in the manual before as I was searching for feature board as opposed to peripheral board).

The http://partsurfer.hp.com site did not let me order from the country I am in - so I am going to try a second hand one from eBay.

Thanks again.



KarloChacon
Honored Contributor

Re: Replacing a featureboard on a Proliant ML570

Rob
where did you get these numbers?

101951-001.
010457-001 is the assembly number.

silly question

Didn't your momma teach you to say thanks!
Wireless_1
Advisor

Re: Replacing a featureboard on a Proliant ML570

Karlo,

It is in the ProLiant ML570 Server
Maintenance and Service Guide. See under the section "Electronics Drawer System Components Spare Parts List", Page 16.

24 Peripheral board 101951-001

The other site ( http://partsurfer.hp.com ) Rob referred to give you the cross reference between the assy # and part # when you click on the part number.
Wireless_1
Advisor

Re: Replacing a featureboard on a Proliant ML570

I have found a solution to this question as seen in the comments above.
KarloChacon
Honored Contributor

Re: Replacing a featureboard on a Proliant ML570

thanks a lot

something new
Didn't your momma teach you to say thanks!
Wireless_1
Advisor

Re: Replacing a featureboard on a Proliant ML570

Yeah...

Today I ordered a replacement peripherel board. I will post an update if I manage to fix it.