ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Reset Administrator Password on DL380/G3 ILO

SOLVED
Go to solution
Dave Murphy_2
Occasional Contributor

Reset Administrator Password on DL380/G3 ILO

Hello Everyone,

Unfortunately a colleague has lost the card with the Administrator password on to get access to the ILO on our DL380/G3.

Does anyone know if it can be reset?

I have heard that there is a security override switch on the main board, but if this is true can anyone point me to a URL/PDF indicating where it is.

Thanks & Regards,

Dave
4 REPLIES
GhostER
Occasional Visitor
Solution

Re: Reset Administrator Password on DL380/G3 ILO

Hi,

if you look at the side panel illustration picture ,there is a switch near the ppm module and next to the RAM modules on mainboard.Just make S1 on then reboot system.Enter ilo without password.later again shutdown and put switch off position.
Dave Murphy_2
Occasional Contributor

Re: Reset Administrator Password on DL380/G3 ILO

Thanks GhostER, I will get him to try that and I am pretty sure it will work if you have done it before.

Will rate you at 10 later.

Thanks

Dave
clemaire
Occasional Visitor

Re: Reset Administrator Password on DL380/G3 ILO

Hey Dave (and anyone else who may stumble upon this),
If you have access to the operating system and it's of the Windows variety, you can follow the directions here Reset Administrator password on iLO

That worked for my DL360.

I'd repost it here but its long. It's worth it though.. no need to be at the machine physically.
clemaire
Occasional Visitor

Re: Reset Administrator Password on DL380/G3 ILO