HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Reset Password - ROM & Array Utility - DL785 G5

 
Ray Siripan
Occasional Advisor

Reset Password - ROM & Array Utility - DL785 G5

Could someone let me know how to reset both ROM amd Array Utility password please, the old administrator just left the company and he not document anything + we have to change some setting in bios and check the array configuration :(

Thanks
1 REPLY
marcus1234
Honored Contributor

Re: Reset Password - ROM & Array Utility - DL785 G5

Hmmmm....
Ray take of the panel it will have a diagram look for the maintenance switch , or could be labelled cmos clear

we need to clear nvranm
Clearing the system configuration
To clear the system configuration:
1. Power down the server
2. Remove any power cables
3. Remove the access panel look at the diagram on it it will show the position of the maintenace switch( it clears Nv ram)
4. Change position 6 of the system maintenance switch to on.
5. Install the access panel
6. Install the server blade in the enclosure and power up the server blade.
7. Wait for the POST message that prompts you to change the switch setting:
Maintenance switch detected in the "On" position.
Power off the server and turn switch to the "Off" position.
8. Repeat steps 1 through 3.
9. Change position 6 of the system maintenance switch to off.
10. Repeat steps 5 through 7.

enjoy :)


This is how we thank in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33