ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Ressource conflict after Remote Insight Board installation

Ayman Altounji
Valued Contributor

Ressource conflict after Remote Insight Board installation

Hello all,

After installing a RIB board in a Proliant DL380G2 machine the Windows
2000 device manager reports the following devices not to function
properly due to a lack of ressources:
- the secondary IDE channel
- the Compaq PCI Remote Insight Board
- the PCI standard PCI-to-PCI bridge
The error/status message is "Cannot find enough free ressources".
Additionally the ATI-graphics-board has gone in the device manager,
and the system uses the standard VGA driver.
Before the installtion of the RIB board, all devices were OK incl. the ATI
board.
What is wrong here?

Thank you for any hints,
Andreas
1 REPLY
Victor Pendlebury
Valued Contributor

Re: Ressource conflict after Remote Insight Board installation

Hi

Check that thr RILOE is in Slot 1 and then reapply the latest support pack

Vic