ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Restore from Ultrium 2 fails on ML530 G2.

CLEB
Valued Contributor

Restore from Ultrium 2 fails on ML530 G2.

Hi

Does anyone know if I need a Fan option kit for internal Ultrium 2 drives in ML530 G2?

HP have a customer advisory for SDLT 110/220 but I cannot find anything about Ultriums.

I am using Arcserve 11.1 and get an error message " Error 6300 6300 Windows NT SCSI PORT Error Module: Tape Engine Reason: Problem with sending a SCSI command to SCSI device."

Windows eventviewer reports "The device, \Device\Scsi\adpu160m1, did not respond within the timeout period."

I am wondering if the drive has shutdown because it is getting too hot.

Any ideas?
2 REPLIES
GemertsR
Occasional Advisor

Re: Restore from Ultrium 2 fails on ML530 G2.

Did you already install the latest firmware and/or software drivers?
Also check for the latest BIOS for the ML530G2
Tux likes sitting at the windowside
CLEB
Valued Contributor

Re: Restore from Ultrium 2 fails on ML530 G2.

I have used the Firmaware upgrade cd 7.20 to update all components before OS install.

Could it be that I need a newer PSP?