Riloe II in DL360 G2

[TLC06]

I plug in new Riloe II card to my DL360 G2 server. I know it will automatic disable the ilo. I saw the message prompted in monitor stated ilo was disable and need to use the ilo override jumper to enable back the ilo.

my question:
1. After plug in the Riloe II, why I do not see the F8 option for me to change the setting for Riloe II card?
2. I cannot find the DL G2 server guide, can anyone tell me how to set the override jumper? the jumper has 3 pins. If I don't want to use the Riloe II, how can I set the jumper to enable the ilo?

Thanks.

[sandeep_raman]

hello tlc06,

http://h20000.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_233831-001_rev1_us/TPM_233831-001_rev1_us.pdf -> pg 63
or
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00687405/c00687405.pdf-> pg 97

ps:
ilo/riloe(2) rbsu(f8) is available every time the server is rebooted unless the card is disabled/damaged.
rbsu(f8) cannot be run remotely.

srh