Riser kit for DL360 G10

khedimy · ‎07-16-2019

Hello,

I have the below described server configuration. It appears that both NIC cards are mapped to same CPU.

As I need to have one NIC per CPU, can someone please indicate which riser kit is to be ordered for this config?

867958-B21 HPE DL360 Gen10 4LFF CTO Server

870968-L21 HPE DL360 Gen10 Xeon-G 6138 FIO Kit

870968-B21 HPE DL360 Gen10 Xeon-G 6138 Kit

815100-B21 HPE 32GB 2Rx4 PC4-2666V-R Smart Kit

875490-B21 HPE 480GB SATA MU M.2 2280 DS SSD

867978-B21 HPE DL360 Gen10 SATA M.2 2280 Riser Kit

817753-B21 HPE Eth 10/25Gb 2P 640SFP28 Adptr

817749-B21 HPE Eth 10/25Gb 2P 640FLR-SFP28 Adptr

871244-B21 HPE DL360 Gen10 High Perf Fan Kit

865414-B21 HPE 800W FS Plat Ht Plg LH Pwr Sply Kit

Thank you

Sebasbin · ‎07-19-2019

Hello khedimy ,

Secondary riser managed by CPU 2 .Please find the below quick specs for your referance

Please find the below spare parts links for DL360 Gen10

secondary riser x16 LP 875539-001
secondary riser x16 FH 875540-001

NOTE: If secondary full height kit is installed, then primary PCIe Slot #2 cannot be used. Only 2 full height slots are supported.

I am an HPE Employee

Re: Riser kit for DL360 G10