ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

S.M.A.R.T. error

Richard_101
Occasional Visitor

S.M.A.R.T. error

After instalation support paq 6.00A I receive from storage agents smart error on drives in second raid controler ide channel. I have ML310 with 4 x WD 120GB (2xRaid 1). I made change positions of hard drives and smart error is only in secondary channel (in both hard drives).

EventLog :
Typ ud+?losti: Upozorn-?n+?
Zdroj ud+?losti: Storage Agents
Kategorie ud+?losti: Events
ID ud+?losti: 1186
Datum: 28.10.2002
-?as: 10:53:21
U++ivatel: Nen+? k dispozici
Po-?+?ta-?: SERVER
Popis:
Compaq IDE ATA Disk Status Change. The ATA disk drive with model WDC WD1200BB-00CAA1 and serial number WD-WMA8C2605716 has a new status of 3.
(ATA disk status values: 1=other, 2=ok, 3=smartError, 4=failed)
[SNMP TRAP: 14004 in CPQIDE.MIB]


Typ ud+?losti: Upozorn-?n+?
Zdroj ud+?losti: Storage Agents
Kategorie ud+?losti: Events
ID ud+?losti: 1186
Datum: 28.10.2002
-?as: 10:53:21
U++ivatel: Nen+? k dispozici
Po-?+?ta-?: SERVER
Popis:
Compaq IDE ATA Disk Status Change. The ATA disk drive with model WDC WD1200BB-00CAA1 and serial number WD-WMA8C2593158 has a new status of 3.
(ATA disk status values: 1=other, 2=ok, 3=smartError, 4=failed)
[SNMP TRAP: 14004 in CPQIDE.MIB]
1 REPLY
Michael Kunze
Occasional Contributor

Re: S.M.A.R.T. error

Hi!
I've searched the forum about the same error like you. Have you got any soluions for your problem? I've changed the board, have the newest BIOS and drivers...

thanx!

Michael