SAS Drivers for ML310 G4 server

[itexpert2000]

i pressed f10 i came in bios interface ..

[Torsten.]

once in bios check the disk controller settings please



sent from mobile

[itexpert2000]

my product number is : S/n CZJ70804FD

THERE ONE THINGS THAT I DONT UNDERSTAND

on the bios primary boot order i onlyu say

PCI embded Intel R 828011GR

but i dont see the SAS disks of 146GB 2x of them..

mybe the SASA disks are not working and that why when i try to install os windows server it say no disks avaiavble ?

or is it disk driver issue

in the startup i see

lsilogic sas1068r

please adivse

[scharchouf]

Standard Boot Order (IPL) menu :

The Standard Boot Order (IPL) option configures the Initial IPL device and controls the search order the server uses to look for a bootable device.

Boot Controller Order menu :

The Boot Controller Order option selects which of the installed mass storage device controllers is used as the primary boot controller. The server attempts to boot the drives attached to each storage controller in the order presented in this list.

By default, the primary boot controller is set to controller 1.

[itexpert2000]

After long investigation I discovers that the two disks have failed

Can I place dell SAS 146 3.5 inch in G4 server 

And doesn't my server also support 2.5 inch SAS.

Please advise 

[itexpert2000]

HP 418367-B21 146GB 10K SAS 2.5-Inch Dual Port Hard Drive

Can u advise if this supported by my server

Thanks

[scharchouf]

No, this HDD is not supported on your server.

Check the PDF file it contains all compatibale Hardware with this server [with basic Smart array installed on it]