HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

SAS drive

 
SOLVED
Go to solution
trog
Occasional Contributor

SAS drive

In a DL380G5 can two p400 controller be attached to the SCSI baclplane?
3 REPLIES
KarloChacon
Honored Contributor
Solution

Re: SAS drive

gi

yes you can

usually 1 p400 can control all 8 HDDs, using 2 cables so each connects 1 channel to the backplane

so what you can do is get 2 p400 controller and use a cable from p400 and connect the backplane

check page 73
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c00710359/c00710359.pdf

so see 1 controller supporting all 8 HDDs since that controller connects both channel in the backplane

just get 2 p400 and use 1 channel from each p400

regards
Didn't your momma teach you to say thanks!
trog
Occasional Contributor

Re: SAS drive

Thank you!!
KarloChacon
Honored Contributor

Re: SAS drive

good next time don't forget assign some points

http://forums11.itrc.hp.com/service/forums/helptips.do?#33
Didn't your momma teach you to say thanks!