SATA drives is not visible in the system

[Ivajlo Yanakiev]

Yes if you see 2 free HDD instead RAID LUN you are in problem.
You problably loss you information.
If you can restore your info recreate your RAID and restore otherwise you need some more clever then me , I can't help here :(

[Prashant (I am Back)]

Sorry my friend Configure Raid in that case if utility says no raid
Then reconfigure OS
If possible can you detail me the process for the option you are using to verify.

Regards,
Prashant S

[Max Sorokin]

Noow i attach one sata hdd to the another server and make a full bakup, then i try to make a raid and reinstall OS.

[Prashant (I am Back)]

hey wait

you said raid was configure
which raid was configured ????????

[Prashant (I am Back)]

hi,

I am going now
I think there was no raid
please explain how are you taking back up and all process
Cya tomorrow.

Regards,
Prashant S.

[Ivajlo Yanakiev]

AAA if you have RAID 1 your LUN can not disappear.
Strange .... hmmm
How you achieve this condition ?
What can erase your RAID config ?

At your last step try to build same RAID config and probably data will be there if you loss only your RAID config.

[Max Sorokin]

I haven't any idea why the raid was broken.

[Arun David]

Hi Max,

As you know now Smart Start is not compatible with 100 series servers, if you need to install the drivers for the SATA controller and to detect the HDD's most of the time the drivers have to be installed using the F6 option while installing windows or during POST try using Ctrl + C or Ctrl + A to configure the SATA controller.

Regards

Arun

[Ivajlo Yanakiev]

Do you think that at last one disk have right data ?

[Max Sorokin]

I recreate array and now i up the server. Thank you for answer