ProLiant Servers (ML,DL,SL)
1748104 Members
4931 Online
108758 Solutions
New Discussion юеВ

SCO 5.0.7 on ML570 crashes after EFS install.

 
Remco Koot
Occasional Contributor

SCO 5.0.7 on ML570 crashes after EFS install.

Hello,

We have a ML570 G2 (Dual Xeon 2.0Ghz) machine and running Openserver 5.0.7 with SMP.
Also the SmartArry 5404 installed fine on default. (ciss controller)

Everything runs fine, until I installed EFS, latest available today.

The machine crashes, atleast becomes very,very slow... no key response in minutes, and gives the folowing error:

ciss: controller heart beat stopped , trying to reset

Any ideas?

Thanks in advance!

Remco Koot
Enjoy!
2 REPLIES 2
Haultecoeur
New Member

Re: SCO 5.0.7 on ML570 crashes after EFS install.

I have the same problems with the version 5.60A , you need to install only the version 5.58b

If you have a board RILOE II, you must retire this board and your computer will run .
Remco Koot
Occasional Contributor

Re: SCO 5.0.7 on ML570 crashes after EFS install.

Hello!

Thanks for reply.

At first I had installed EFS 5.58B. That one gave the CISS: heart beat error.
Therefore I searched for a newer one, and the latest gave the same error.

So for me I guess 5.58B is not the solution.

I also have no RIOLE II board installed.

Whatelse could be wrong?

Thanks again!

-Remco Koot
Enjoy!