HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

SCSI-2 on Proliant ML330 Integrated SCSI Controller?

 
Stephen Benwell
Occasional Visitor

SCSI-2 on Proliant ML330 Integrated SCSI Controller?

Does a Proliant ML330 G3 support SCSI-2 (DVD-RAM) with Integrated SCSI Controller.

I have bought a Smart Array 641 for the HDD and am hoping the integrated SCSI controller will support SCSI-2 Panasonic LFD-201 DVD-RAM drives. However the spec sheet indicates that it is LVD only, which my limited knowledge of SCSI suggests may be a problem for my DVD-RAMs

Can anyone advise ?
2 REPLIES
JohnWRuffo
Honored Contributor

Re: SCSI-2 on Proliant ML330 Integrated SCSI Controller?

The internal SCSI controller should have no trouble with this DVD Drive. Depending on the cable you use, you may need to set termination on the drive. Be sure the drive SCSI ID (ID3 by default) does not conflict with any other device on the chain.

Here is a PDF of the DVD-RAM Drive:
http://media-server.amazon.com/media/mole/MANUAL000002646.pdf
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
JohnWRuffo
Honored Contributor

Re: SCSI-2 on Proliant ML330 Integrated SCSI Controller?

You will need one of these to connect the drive if you use the cable that comes with the server:
http://www.adaptec.com/worldwide/product/cableprodindex.html?prodkey=ACK-68P-50P-IU
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt