SCSI Array driver

[Ayman Altounji]

I am getting the following critical message in System log whenever I reboot.

The device, \Device\Scsi\cpqarry21, is not ready for access yet.

[Ayman Altounji]

That's the OS calling the controller too early. If it only happens a minute or so after the log starts it's nothing to worry about. If it happens repeatedly later on (after the system's been up for a while) there could be something going on.

[Ayman Altounji]

I've got the same problem. How can I get the OS to call the controller later ?
I can't sell a Server to a customer, which reports critical messages in the System log whenever I reboot.
Greetings Oliver Marti

[Ayman Altounji]

I have quite a similar critical message in System log whenever the DL380 reboot. "\Device\SCSI\cpqfcalm1, does not respond within a specific time period"

This error happen only after 3 months.