ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

SCSI BIOS NOT INSTALLED

shadee
Occasional Visitor

SCSI BIOS NOT INSTALLED

Dear All,
I have a HP ML350 G3 server with 2 Scsi hard drive , and i use raid 1 ,now i wont to install win2003 server , but i hav the following problem "No scsi device found" and "SCSI BIOS NOT FOUND"

so , how to install SCSI bios ??

Rgrads.
3 REPLIES

Re: SCSI BIOS NOT INSTALLED

Shadee - I assume you have a RAID Controller either standard or embedded - the SCSI bios not found message is normal in this scenario - nothing to worry about if everything else is working - just go ahead with installing W2K3
no solo de pan vive el hombre
Nathan Gervais
Trusted Contributor

Re: SCSI BIOS NOT INSTALLED

Make sure that you go into your F9 RBSU and set your boot controller order to the array controller. Then use a SmartStart CD to install your OS.
Prashant (I am Back)
Honored Contributor

Re: SCSI BIOS NOT INSTALLED

Hi,

Disregard message, this is normal part of operation
And proceed with the installation of the OS Before the same check the Array infomraiton and the Boot controller order then proceed with the instllation of the OS will resolve the issu.

If possible clear the configuration of the server to check with.

Regards,
Prashant S.
Nothing is impossible