ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

SCSI BIOS Not Installed -ML370 G3

mecde
Occasional Visitor

SCSI BIOS Not Installed -ML370 G3

My ML370 G3 was recently rebooted and now it fails to see the two scsi hard drives (raid 1) when it tries to boot. I have the HP Smart Array 641 and it recognizes the drives, but when the HP Ultra 3 BIOS starts up, it displays "No SCSI Boot Device Found" and "SCSI BIOS Not Installed". These drives have been running fine for about a year and all of the sudden this happend. I've updated the firmware with the most current Smart Start CD and the diagnostics on the CD see the drives and say they are functioning fine. Anyone have any ideas on how I might recover from this without losing any data from my drives? Thanks!!!!!

 

 

P.S. This thread has been moved from ProLiant Servers - Netservers to ProLiant Servers (ML,DL,SL).
-HP Forum Moderator

2 REPLIES
amhakassa
Honored Contributor

Re: SCSI BIOS Not Installed -ML370 G3

Hi Mecde,

Reboot the server to F9 --RBSU Rom Based Setup Utility and check if the array controller 641 is on top in the boot controller boot priority


Regards
Amha Kassa
fkamau75
Occasional Visitor

Re: SCSI BIOS Not Installed -ML370 G3

HP ProLiant ML310 - SCSI Bios not installed error message i have checked by Rebooting the server to F9 --RBSU Rom Based Setup Utility and check if the array controller 641 is on top in the boot controller boot priority